The Viscometer measures rheological properties of Newtonian and non-Newtonian fluids. The test data can display by Liquid crystal display. Speed, viscosity, dials reading, for each test. API Tests Pre-programmed,12 presets (600,300,200,180,100,90,60,30,6,3,2,1)
The High Temperature Atmospheric Swell Meter (HASM) helps determine shale hydration or dehydration by measuring the increase or decrease in length over time of reconstituted or intact shale core. Measuring Units 4 head,Measuring Range:0-20mm Working Temperature:0-300℃(572℉)
The HTHP Filter Press is designed to evaluate the filtration characteristics of drilling fluids, cement slurries, fracturing fluids, and completion fluids under elevated temperatures and pressures. Maximum Temperature : 500℉ (260℃) 500 ml Double Capped Sample Cell for Cement Screens
Low Pressure, Low Temperature (LPLT) Filter Presses are the most effective means of determining the filtration properties of drilling muds and cement slurries. 240ml Sample Cell, Working pressure is 100 psig and the filtering area is 7.1-in2.
The High-Pressure, High-Temperature (HPHT) Consistometer measures cement slurry viscosity or consistency under elevated pressure and temperature conditions. Maximum operating temperature of 600 ℉ (275℃) UNIT working pressure: 40,000psi (2750 kPa) Single cell
Standard crush or non-destructive compressive-strength tests are performed on cement slurry samples under simulated downhole pressure and temperature conditions to determine the initial set time and the wait-on-cement (woc) time. Temperature: up to 700℉ (370℃) Pressure: up to 5,950psi (41mPa) 8+8 cube mold sets, (Double Cells)
The Aging Cell with Teflon Liner is a 500 ml, Type 316 / 304 stainless steel pressure vessel, certified for 600℉ (315℃) and 2500 psi (17,237 kPa) RIGCHINA aging cells are designed to be used with RIGCHINA Roller Oven. It be found in API 13B-1 and 13I.
The test data can display by Liquid crystal display. Speed, viscosity, dials reading, for each test. API Tests Pre-programmed,6 presets 600, 300, 200, 100, 6, 3 RPM OLED display for easier reading,Push button design for easy operation and better control
The Atmospheric Swell Meter (ASM) helps determine shale hydration or dehydration by measuring the increase or decrease in length over time of reconstituted or intact shale core. Measuring Range:0-20mm Measuring Units 4 head
The HTHP Filter Press is designed to evaluate the filtration characteristics of drilling fluids, cement slurries, fracturing fluids, and completion fluids under elevated temperatures and pressures. Maximum Temperature : 500℉ (260℃) Double Capped Sample Cell 500 ml for Ceramic Disks
The Filter Presse is the most effective means of determining the filtration properties of drilling muds and cement slurries. 4 units 500ml Cells, Working pressure is 100 psig and the filtering area is 7.1-in2.