The Lab Blender with 10 levels of variable speed, making easier for adjusting and choosing speed level.
10 Preset: 3800,7600,11400,15200,19000,22800,26600,30400,34200,38000 RPM
3 auto-timer program
Variable Speeds Range: 0-38,000 RPM

The High-Pressure, High-Temperature (HPHT) Consistometer measures cement slurry viscosity or consistency under elevated pressure and temperature conditions. Maximum operating temperature of 600 ℉ (275℃) UNIT working pressure: 40,000psi (2750 kPa)  Double cells

The Cement Cube Mold is used to form 2" (50.8 mm) cube samples for compressive strength testing of Portland cement, mortars, lime, gypsum and capping compounds.
2-Unit,4-Gang   Cement Cube Mold Sample   Size: 2" (50.8 mm) cube

The Aging Cell with Teflon Liner is a 260 ml, Type 316 / 304 stainless steel pressure vessel, certified for 600℉ (315℃) and 2500 psi (17,237 kPa)
RIGCHINA aging cells are designed to be used with RIGCHINA Roller Oven. It be found in API 13B-1 and 13I.
 

The Dynamic Linear, Swell Meter , High Temperature helps determine shale hydration or dehydration by measuring the increase or decrease in length over time of reconstituted or intact shale core. 
Measuring Units 4 head,Measuring Range:0-20mm Working Temperature:0-300℃（572℉）

The Cement Cube Mold is used to form 2" (50.8 mm) cube samples for compressive strength testing of Portland cement, mortars, lime, gypsum and capping compounds.
4-Unit,8-Gang   Cement Cube Mold Sample   Size: 2" (50.8 mm) cube

Thermocups and cup heaters are designed for controlling the temperature of a mud sample while taking readings with a rheometer or viscometer. Normal heat-up time is 30 minutes and the pilot light turns on when the well reaches the set temperature. Drilling fluid has a low thermal c

Weighing is a required part of almost any analysis, both for measuring the sample and for preparing standard solutions.
To order specify: Capacity 
Readability 

The Dynamic High Temperature High Pressure (HTHP) filter press measures filtration volume and cake building properties under varying downhole conditions.
 Variable speed electric motor, ½ HP permanent magnet DC

The Filter Presse is the most effective means of determining the filtration properties of drilling muds and cement slurries.
6 units 500ml Cells, Working pressure is 100 psig and the filtering area is 7.1-in2.
 

The GJ-3S mixer is special-purpose experimental equipment in petroleum exploration and drilling field. Variable Speeds Range: 0-13,000 RPM Programmable Time:from 1 sec to 999 sec

The Aging Cell with Teflon Liner is a 500 ml, Type 316 / 304 stainless steel pressure vessel, certified for 600℉ (315℃) and 2500 psi (17,237 kPa)
RIGCHINA aging cells are designed to be used with RIGCHINA Roller Oven. It be found in API 13B-1 and 13I.