The Cement Cube Mold is used to form 2" (50.8 mm) cube samples for compressive strength testing of Portland cement, mortars, lime, gypsum and capping compounds. 4-Unit,8-Gang Cement Cube Mold Sample Size: 2" (50.8 mm) cube
The Cement Cube Mold is used to form 2" (50.8 mm) cube samples for compressive strength testing of Portland cement, mortars, lime, gypsum and capping compounds. 2-Unit,4-Gang Cement Cube Mold Sample Size: 2" (50.8 mm) cube
Standard crush or non-destructive compressive-strength tests are performed on cement slurry samples under simulated downhole pressure and temperature conditions to determine the initial set time and the wait-on-cement (woc) time. Temperature: up to 700℉ (370℃) Pressure: up to 5,950psi (41mPa) 8 cube mold set, (Single Cell)
Standard crush or non-destructive compressive-strength tests are performed on cement slurry samples under simulated downhole pressure and temperature conditions to determine the initial set time and the wait-on-cement (woc) time. Temperature: up to 700℉ (370℃) Pressure: up to 5,950psi (41mPa) 8+8 cube mold sets, (Double Cells)
Adaptable for use as a control parameter for waste disposal facilities The Model CST-440 Capillary Suction Timer (CST) consists of a digital timer, sample cell, and a specially selected filter paper composed of unidirectional fibers.
These stirrers are ideal stir tool for laboratory uses. Adjustable heating temperature, stirring times and stirring speeds. Automatic hold setting temperature through incidental temperature probe. Maximum Stirring Volume: 2000mL , Stirring Speed: 0~2500rpm , Timer: 999 minutes ,Temperature Range: up to 300℃
The mixers are recommended for use in general purpose mixing of drilling fluids in preparation for laboratory tests of mud materials. 2 spindle,Volume: 500ml*2 Preset of Speeds:3000, 4000, 8000, 10, 000, 11,000 and 12,000 RPM
The mixers are recommended for use in general purpose mixing of drilling fluids in preparation for laboratory tests of mud materials. 4 spindle,Volume: 500ml*4 Preset of Speeds:3000, 4000, 8000, 10, 000, 11,000 and 12,000 RPM
The mixers are recommended for use in general purpose mixing of drilling fluids in preparation for laboratory tests of mud materials. Preset of Speeds:3000, 4000, 8000, 10, 000, 11,000 and 12,000 RPM 1 spindle,Volume: 500ml
The mixers are recommended for use in general purpose mixing of drilling fluids in preparation for laboratory tests of mud materials. 3 spindles,Volume: 1500ml*3 Speeds: 0-18,000 RPM, No of Speeds: 3(Low, Medium, High).
The mixers are recommended for use in general purpose mixing of drilling fluids in preparation for laboratory tests of mud materials. Speeds: 0-18,000 RPM, No of Speeds: 3(Low, Medium, High). 1 spindle,Volume: 1500ml