PRODUCTS
HOME » PRODUCTS
Sort  
  • Add to Compare
    HTHP Differential Sticking Tester Model HDST-02
    Measures the Stuck Tendency Coefficient with the Timed Filtrate Test. Working Pressure: 477.5 psig (3,291 kPa). Working Temperature: up to 170℃ (340℉)
  • Add to Compare
    Differential Sticking Tester Model DST-01
    Measures the Stuck Tendency Coefficient with the Timed Filtrate Test. Working Pressure: 477.5 psig (3,291 kPa).  
  • Add to Compare
    Viscosity factor meter Model VFM-3A
    Viscosity factor meter is used to measure and appraise the lubricity of drilling fluid and quality compatibleness of drilling fluid lubricant. The meter has the characters of reasonable structure, reliable work, high accuracy and good repetitiveness Turnover speed:5.5-6.5minutes/round Angle reading:Accuracy by number:0.5
  • Add to Compare
    Automated HTHP Cement Consistometer Model RHC-8040
    The High-Pressure, High-Temperature (HPHT) Consistometer measures cement slurry viscosity or consistency under elevated pressure and temperature conditions. Maximum operating temperature of 600 ℉ (275℃) UNIT working pressure: 40,000psi (2750 kPa)  Double cells
  • Add to Compare
    HPHT Filter Press Model HFP-71,Single Capped Cell for Filter Paper
    The HTHP Filter Press is designed to evaluate the filtration characteristics of drilling fluids, cement slurries, fracturing fluids, and completion fluids under elevated temperatures and pressures.
    Maximum   Temperature : 500℉   (260℃)
    500 ml Single Capped Sample Cell for Filter Paper 
  • Add to Compare
    Automated HTHP Cement Consistometer Model RHC-8020
    The High-Pressure, High-Temperature (HPHT) Consistometer measures cement slurry viscosity or consistency under elevated pressure and temperature conditions. Maximum operating temperature of 600 ℉ (275℃) UNIT working pressure: 40,000psi (2750 kPa) Single cell
  • Add to Compare
    Atmospheric Cement Consistometer Model RCA-1250
    The Atmospheric Consistometer is used for conditioning cement slurries as specified within API Specification 10. Determination of rheological properties, examination of free water content, and valuation of the API fluid loss test all require that the cement slurry be pre-conditioned by an Atmospheric Consistometer. 
  • Add to Compare
    Methylene Blue Test Kit RMBT-25
    The Methylene Blue Test determines the amount of reactive solids in a fluid sample, based on the cation exchange capacity of the solids.
  • Add to Compare
    Centrifuges Manually Operated Model HC-2100
    This hand driven centrifuge is perfect for field use. The simple compact design eliminates complicated operation and assures years of dependable service.
    Centrifuge, Hand Crank, 2 Place Head and Shields for 100 mL Tubes
    Hand Driven – Max Speed is 2000 RPM.
  • Add to Compare
    Centrifuges Manually Operated Model HC-2000
    This hand driven centrifuge is perfect for field use. The simple compact design eliminates complicated operation and assures years of dependable service.
    Centrifuge, Hand Crank, 2 Place Head and Shields for 15 mL Tubes
    Hand Driven – Max Speed is 2000 RPM.
  • Add to Compare
    Curing Chamber- Atmospheric Model RCCA- 2128
    Standard crush or non-destructive compressive-strength tests are performed on cement slurry samples under simulated downhole pressure and temperature conditions to determine the initial set time and the wait-on-cement (woc) time.
    Temperature:   up to 200℉ (93℃) Pressure   :Atmospheric
     
  • Add to Compare
    Benchtop HTHP Curing Chamber Model RCC-7360
    Standard crush or non-destructive compressive-strength tests are performed on cement slurry samples under simulated downhole pressure and temperature conditions to determine the initial set time and the wait-on-cement (woc) time.
    Temperature: up to 600℉ (315℃)
    Pressure: up to 5,950psi (41mPa)
    4   cube mold set (Small Cabinet)