Multiple Unit Filter Press (LPLT) Model MFP-6B, 6 unit 1000ml
API Low Pressure, Low Temperature (LPLT) Filter Presses are the most effective means of determining the filtration properties of drilling muds and cement slurries.
Working pressure is 100 psig and the filtering area is 7.1-in2, as specified in the American Petroleum Institute, API Recommended Practice 13B-1 and 13B-2.
***All The Filter press may be custom designed to meet customers' individual specifications. Special requests and suggestions are always welcome.such as 800ml cell,1000ml cell,1500ml cell and 2000ml cell etc.
Multiple Unit Filter Press
Multiple Unit Filter Press assemblies permit simultaneous running of one to six filtration tests. Each one of the assemblies consists of a frame with the indicated number of complete Stainless Steel filter cells. Manifolds are complete with air hoses, cut-offs and bleeder valves. Accessories such as pressure regulators and hoses for connection to pressurization source are sold separately.
| Filter Press API Specifications |
Part No. | Model | Description | Remark |
140-10 | LFP-1C | Filter Press W/Case, Hand Pump pressure assembly
Working pressure is 100 psig(0.7mPA)
the filtering area is 7.1-in2(45.8cm2)
240ml Sample Cell |
|
140-20 | RCLF-1A | Hand Pump pressure assembly
Working pressure is 100 psig(0.7mPA)
The filtering area is 7.1-in2(45.8cm2)
500 ml Sample Cell |
|
140-30 | RCLF-2A | CO2 Balloon Pressure Assembly
Working pressure is 100 psig(0.7mPA)
The filtering area is 7.1-in2(45.8cm2)
500 ml Sample Cell |
|
140-35 | RCLF-3A | CO2(N2) Tanks with Assembly
Working pressure is 100 psig(0.7mPA)
The filtering area is 7.1-in2(45.8cm2)
500 ml Sample Cell |
|
140-40 | MFP-4A | 4 units 500ml Cells
Regulator Assembly ,For Nitrogen(CO2) Pressure
Working pressure is 100 psig(0.7mPA)
The filtering area is 7.1-in2(45.8cm2) |
|
140-60 | MFP-6A | 6 units 500ml Cells
Regulator Assembly ,For Nitrogen(CO2) Pressure
Working pressure is 100 psig(0.7mPA)
the filtering area is 7.1-in2(45.8cm2) |
|